Flying Cannon Simulation Penis

Product Introduction

The design concept of the Skyrocket is based on the state of women in the full release of desire. Like a skyrocket impacting the G-spot, it quickly brings her to climax, with continuous wild thrusting that no man’s speed can match, leaving only heartfelt moans in the storm. The liquid silicone material and realistic details elevate this experience to a greater level. Combined with the super-strong suction cup, scenarios are diverse, and even the wildest movements will not cause it to detach—just enjoy the pleasure of intimacy.

Precautions for Use

• Before using the product, please charge it. The indicator light flashes during charging and stays on when fully charged.
• A full charge takes 3 hours. The actual charging time may vary depending on the remaining battery level inside the device.
• After a full charge, the normal usage time of this device is 1 hour. The actual usage time depends on the mode you select; the more modes activated and the higher the frequency, the faster the battery will be consumed.
• Before each use, please disinfect and clean the product. Wash with warm water and antibacterial body wash or soap, then gently dry with a towel or soft cloth.
• Before using this product, please read this user manual carefully and keep it in a safe place.
• When disposing of this product, it should be treated as waste electrical and electronic equipment and recycled at the designated waste electrical and electronic equipment collection station. This product is not suitable for disposal as ordinary household waste.

Functional Instructions

I. Main Unit Operation

1. Press and hold the power button on the main unit for 1.5 seconds. The motor vibrates once and stops, the LED light stays on, and the product powers on.
2. Press the power button again. The motor runs continuously, cycling through ten vibration frequencies, accompanied by three telescopic frequency switches.
3. Double-click the power button on the main unit. The LED light flashes for 5 seconds, indicating that heating is activated.
4. Press and hold the power button for 1.5 seconds to power off. After powering off, press the button again to adjust the length of the main unit.

II. Remote Control Operation

1. When the product is powered on, short press the “Power” button on the remote control to switch the telescopic motor frequency. Press and hold the “Power” button to pause the telescopic function.
2. Short press the “Heating” button on the remote control to switch the vibration motor frequency. Press and hold the “Heating” button to pause the vibration motor. Double-click the “Heating” button—the LED light on the main unit flashes to indicate heating activation; double-click again to turn it off.

III. Charging Operation

Connect the charging cable to a 5V power source. Insert the 2.5DC charging head vertically into the product’s charging port. The LED light flashing indicates charging is in progress. The LED light staying on indicates charging is complete.

Cleaning Instructions

1. After use, your “precious toy” will have a large amount of secretions and lubricant residue. If not cleaned for a long time, it is easy to breed bacteria, so please clean your “precious toy” as soon as possible after use.
2. Cleaning can be done with warm water and antibacterial body wash or soap. It is recommended to use a special cleaner for adult toys or 75% alcohol for disinfection. (It is not recommended to use alcohol for a long time, as alcohol will corrode the surface of the toy and accelerate the aging of the device.)
3. After rinsing, wipe with a dry cotton cloth or high-quality paper towel, then let it air dry naturally. Do not expose it to direct sunlight.

Warranty

⚠ Warning: This product is intended for adults aged 18 and over only.